Description:
ARM Cortex-M4F CPU running at up to 120 MHzFloating Point Unit (FPU)Embedded Trace Module (ETM) with instruction trace streamCore Sight Embedded Trace Buffer (ETB)Error Correction Code (ECC)Dual bank with Read-While-Write (RWW) supportEEPROM hardware emulationError Correction Code (ECC) RAM optionUp to 4 KB of Tightly Coupled Memory (TCM)Up to 8 KB additional SRAM with backup retention capabilityPower-on Reset (POR) and Brown-out detection (BOD)Internal and external clock optionsExternal Interrupt Controller (EIC)Two-pin Serial Wire Debug (SWD) programming, test, and debugging interfaceFive Low Power Modes (Idle, Standby, Hibernate, Backup, and Off )Sleep Walking peripherals.Battery backup supportEmbedded Buck/LDO regulator supporting on-the-fly selection.65µA/MHz active power consumption.Five confidential modes of operation (ECB, CBC, CFB, OFB, CTR)True Random Number Generator (TRNG)RSA, DSAElliptic Curves Cryptography (ECC) ECC GF(2n), ECC GF(p)Integrity Check Module (ICM) based on Secure Hash Algorithm (SHA1, SHA224, SHA256), DMA32-channel Direct Memory Access Controller (DMAC)Compatibility with SD and SDHC Memory Card Specification Version 3.01Compatibility with SDIO Specification Version 3.0Compliant with JDEC specification, MMC memory cards V4.51eXecute-In-Place (XIP) supportUp to 75 MHz SDR operation and DDR supportEmbedded host and device function10/100 Mbps in MII and RMII with dedicated DMAIEEE 1588 Precision Time Protocol (PTP) , Time Stamping Unit (TSU) supportIEEE802.3AZ/AF/PoE energy efficiency supportSupport for 802.1AS and 1588 precision clock synchronization protocolWake on LAN supportUSART with full-duplex and single-wire half-duplex configurationISO7816I2C up to 3.4MHzSPILIN master/slaveRS485SPI inter-byte spaceOne two-channel Inter-IC Sound Interface (I2S) Up to 14-bit parallel capture mode Up to 256 channel capacitive touch and proximity sensing32-channel Event System16-bit ,32-bit or 8-bit TC with two compare/capture channels Two 24-bit Timer/Counters for Control (TCC), with extended functions:Up to 5 wake-up pins with tamper detection and de-bouncing filterWatchdog Timer (WDT) with Window modeCRC-32 generatorPosition Decoder (PDEC)Frequency meter (FREQM)One Configurable Custom Logic (CCL)Differential and single-ended inputAutomatic offset and gain error compensationOversampling and decimation in hardware to support 13-, 14-, 15-, or 16-bit resolutionDual 12-bit, 1 MSPS Output Digital-to-Analog Converter (DAC) Two Analog Comparators (AC) with Window Compare functionOne temperature sensor81 programmable I/O pins1.71V – 3.6V100-pin TQFP