SEARCH
Quick RFQ
Part Number: ATSAM4E16C
Manufacturer:
Microchip
Category:
High-Speed Networking and Video
Availability:
1221
Description:
ARM Cortex-M4 with 2 Kbytes Cache running at up to 120 MHzMemory Protection Unit (MPU)DSP Instructions, Floating Point Unit (FPU), Thumb®-2 instruction set1024 Kbytes Embedded Flash128 Kbytes Embedded SRAM16 Kbytes ROM with Embedded Boot Loader Routines (UART) and IAP RoutinesEmbedded voltage regulator for single-supply operationPower-on-Reset (POR), Brown-out Detector (BOD) and Dual Watchdog for Safe OperationQuartz or ceramic resonator oscillators: 3 to 20 MHz with clock failure detection and 32.768 kHz for RTT or system clockRTC with Gregorian and Persian Calendar Mode, Waveform Generation in Backup modeRTC counter calibration circuitry compensates for 32.768 kHz crystal frequency inaccuracyHigh-precision 8/16/24 MHz factory-trimmed internal RC oscillator. In-application trimming access for frequency adjustmentSlow clock internal RC oscillator as permanent low-power mode device clockOne PLL up to 240 MHz for Device Clock and for USBTemperature SensorLow-power tamper detection on two inputs, anti-tampering by immediate clear of general-purpose backup registers (GPBR)Up to 2 Peripheral DMA Controllers (PDC) with up to 33 ChannelsOne 4-channel DMA ControllerSleep, Wait and Backup modes, down to 0.9 µA in Backup mode with RTC, RTT, and GPBR100-ball TFBGA, 9x9 mm, pitch 0.8 mm100-lead LQFP, 14x14 mm, pitch 0.5 mmRevision A - Industrial (-40° C to +85° C), Revision B -(-40° C to +105° C)Two USARTs with USART1 (ISO7816, IrDA®, RS-485, SPI, Manchester and Modem Modes)USB 2.0 Device: Full Speed (12 Mbits), 2668 byte FIFO, up to 8 Endpoints. On-chip TransceiverTwo 2-wire UARTsTwo 2-wire Interfaces (TWI)High-speed Multimedia Card Interface (SDIO/SD Card/MMC)One Master/Slave Serial Peripheral Interface (SPI) with Chip Select SignalsThree 3-channel 32-bit Timer/Counter blocks with Capture, Waveform, Compare and PWM Mode. Quadrature Decoder Logic and 2-bit Gray Up/Down Counter for Stepper Motor.32-bit low-power Real-time Timer (RTT) and low-power Real-time Clock (RTC) with calendar and alarm features256-bit General Purpose Backup Registers (GPBR)One Ethernet MAC (GMAC) 10/100 Mbps in MII mode only with dedicated DMA and Support for IEEE1588, Wake-on-LANOne CAN Controllers with eight Mailboxes4-channel 16-bit PWM with Complementary Output, Fault Input, 12-bit Dead Time Generator Counter for Motor Control.Real-time Event ManagementUp to 79 I/O Lines with External Interrupt Capability (Edge or Level Sensitivity), Debouncing, Glitch FilteringBidirectional Pad, Analog I/O, Programmable Pull-up/Pull-downFive 32-bit Parallel Input/Output Controllers, Peripheral DMA Assisted Parallel Capture ModeAES 256-bit Key Algorithm compliant with FIPS Publication 197AFE (Analog Front End): 2x16-bit ADC, up to 24-channels, Differential Input Mode, Programmable Gain Stage, Auto Calibration and Automatic Offset CorrectionOne 2-channel 12-bit 1 Msps DACOne Analog Comparator with Flexible Input Selection, Selectable Input HysteresisSerial Wire/JTAG Debug Port(SWJ-DP)Debug access to all memories and registers in the system, including Cortex-M4 register bank when the core is running, halted, or held in reset.Serial Wire Debug Port (SW-DP) and Serial Wire JTAG Debug Port (SWJ-DP) debug access.Flash Patch and Breakpoint (FPB) unit for implementing breakpoints and code patches.Data Watchpoint and Trace (DWT) unit for implementing watchpoints, data tracing, and system profiling.Instrumentation Trace Macrocell (ITM) for support of printf style debugging.IEEE1149.1 JTAG Boundary-scan on all digital pins.ASF-Atmel software Framework – SAM software development frameworkIntegrated in the Atmel Studio IDE with a graphical user interface or available as standalone for GCC, IAR compilers.DMA support, Interrupt handlers Driver supportUSB, TCP/IP, Wi-Fi and Bluetooth, Numerous USB classes, DHCP and Wi-Fi encryption StacksRTOS integration, FreeRTOS is a core component
Requeset For ATSAM4E16C
Please submit the following information.
Name*
Tel
Company
Email*
Quantity and Demand*
Detailed Product Description
For New Designs, we highly recommend to consider Revision B for Prototypes and Production. ARM® Cortex®-M4 processor-based microcontroller (MCU), the SAM4E16C features a floating point unit and a high data bandwidth architecture and is targeted at industrial automation and building control applications. The device embeds 1MB Flash and features multiple networking/connectivity peripherals, including one 2.0A/B compatible CAN interface and one IEEE Std 1588-compatible 10/100Mbps Ethernet MAC. Additional communication interfaces include a FS USB device, a HS SDCard/SDIO/MMC interface, USARTs, SPIs and multiple TWIs. Analog features includes dual 1Msps, 16-bit ADCs of up to 10 channels with analog front end offering offset and gain error correction, and a 2-channel, 1Msps, 12-bit DAC. The SAM4E8E is available in 100-pin BGA and QFP package options.
+
Years Senior Experience
+
Million Offers
+
Staffs Worldwide
Traceable Vendors
+
Countries Customers

Most Popular Line Cards

Most Popular Part Numbers

Our line cards
Allegro MicroSystems Amphenol Analog Devices Bourns Cypress Semiconductor Diodes Incorporated Honeywell Infneon Tecnologies AG Intel ITT Inc KEMET Corporation KYOCERAAVX Components 3M Littelfuse Microchip Technology Micron Technology Microsemi Molex Murata Manufacturing Nexperia NVIDIA Corporation NXP Semiconductors onsemi Panasonic Raspbery Pi Foundation Renesas Electronics ROHM Semiconductor Silicon Labs ABB STMicroelectronics TDK TE Connectivityr Texas Instruments Vishay More >>
Links
Services Solutions Quality About
Contact Us
Tel: (86) 755 8395 9469
E-mail: info@eurotech-lcd.com
E-mail: info@eurotech-ic.com
Add: Building A, Jinfeng Zhihui Valley, No. 45, Yonghe Road, Bao'an District, Shenzhen
HK office: Unit 1003-1004,10/F, Block4, Nam Fung Industrial City, 18 Tin Hau Road,Tuen Mun, HONGKONG
Follow Us:
                    
EUROTECH All rights reserved.  Prohibit copying the content of this website!